This is the authors' abstract. We don't add key points for this paper.
Antimony implants at 40 keV and at a dose of 4 × 10 14 cm −2 have been characterized for their potential use in n -type shallow junction formation. The electrical characterization was done using sheet resistivity and Hall effect measurements. High electrical activities (>80%) and low sheet resistance values (<200 Ω/□) were obtained for annealing temperatures below 800 °C. A novel differential Hall effect technique was used to obtain doping profiles at a depth resolution down to 1 nm, with a comparison made between these and Rutherford backscattering (RBS) measurements of the atomic profile as a function of annealing temperature. The antimony shows insignificant diffusion for annealing temperatures of 800 °C and below, with junction depths of about 60 nm. Electrical activation correlates well with the substitutional fraction of antimony determined by RBS.
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Alzanki et al. (2004) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: