Answers are grounded in this paper and cite their sources.
The microstructure evolution of an as-processed 8090 Al-Li alloy during high temperature deformation has been investigated with emphasis on the dynamic grain size refinement and the formation of high-angle grain boundaries. Tensile tests were conducted at temperatures 470–560°C and initial strain rates of 10−2–10−6 s−1. The starting and deformed samples were characterized using Scanning Electron Microscopy (SEM), Transmission Electron Microscopy (TEM), and Electron Backscattered Diffraction (EBSD). The material showed a maximum elongation to failure of 660% at 530°C and strain rate of 10−3 s−1. A microstructural transformation from coarse grains to uniform fine microstructure through dynamic recrystallization (DRX) was observed. The DRX process was characterized by (1) a bimodal microstructure, (2) a gradual increase in average boundary misorientation angles, and (3) a gradual decrease of microtexture. The development of high angle boundaries was attributed to the absorption of dislocations into subboundaries and the grain boundary sliding (GBS)-induced subgrain rotation. The microstructural evolution was suggested to be responsible for the superplastic behavior observed in this as-processed material.
No takes yet. Share an insight, caveat, or question.
Xun et al. (2004) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: