Answers are grounded in this paper and cite their sources.
Warm (250–450 °C) cleanup of coal- or biomass-derived syngas requires sorbents and catalysts to protect downstream conversions. We report first a sequential ZnO bed operation in which the capacity is optimized for bulk desulfurization at 450 °C, while subsequent removal of sulfur to parts-per-billion levels can be accomplished at a lower temperature of approximately 300 °C. At this temperature, gaseous sulfur (H 2 S and COS) could be adsorbed equally well using ZnO, both with and without the presence of H 2 O in the feed, suggesting direct absorption of COS can occur. Following five sulfidation and regeneration cycles, the bulk desulfurization bed lost about a third of its initial sulfur capacity; however, sorbent capacity stabilized. A bench-scale process consisting of five unit operations is described for the cleanup of a several contaminants in addition to sulfur. Syngas cleanup was demonstrated through successful long-term performance of a poison-sensitive Cu-based water-gas shift catalyst placed downstream of the cleanup process train. The process removed 99+% of the sulfur; however, improvements can be made toward full regenerability of the ZnO bed and with complete elimination of sulfur slip through the guard beds. The use of a tar reformer was found to be an important and necessary operation with this particular gasification system; its inclusion provided the difference between deactivating the water-gas catalyst through carbon deposition and having a largely successful 100 h test using 1 LPM of coal-derived syngas.
No takes yet. Share an insight, caveat, or question.
Spies et al. (2017) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: