Answers are grounded in this paper and cite their sources.
The effect of N-Methylol acrylamide (NMA) co-monomer content on modified vinyl acetate-based wood adhesive's water resistance and heat stability were studied. Emulsion polymerisation was used to synthesise NMA-modified vinyl acetate copolymer with varying proportions NMA, such as 0%, 25%, 50%, 75% and 100% (in accordant with NMA content in vinyl acetate – NMA copolymer by wt.) incorporated in the copolymer backbone. To quantify the effects of variations of NMA and aluminium chloride hexahydrate content on stability and water resistance of modified polymer, Glass transition temperature (Tg) and cross-linking behaviour of the polymer films were analysed using dynamic mechanical analysis (DMA) and differential scanning calorimetry (DSC), respectively. DSC result showed a substantial increase in Tg, with an increase in NMA proportion in the copolymer emulsion. Also, the result of DMA showed a distinct shift of the tan-delta curve towards the higher side so does the storage modulus. According to EN 204, the tensile shear strength of a 50% NMA-modified adhesive decreased by 23.89% in a wet environment when compared to a 100% NMA-modified adhesive. Optimising the pH and concentration of NMA was observed to be critical to getting the best possible benefits in terms of moisture tolerance and stability.
No takes yet. Share an insight, caveat, or question.
Ravindra V. Gadhave (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: