Answers are grounded in this paper and cite their sources.
Aerospace structures require highly precise strain detection and structural health monitoring (SHM) to ensure operational safety and identify microcracks during routine ground tests. Conventional foil type strain gauges suffer from low gauge factor (GF∼2.2), poor flexibility, and significant wiring complexity. Optical sensors, although precise, are costly, fragile, and require complex signal interrogation systems. Flexible printed sensors can offer a promising alternative but developing deployable flexible sensing arrays that can reliably detect strains below 500 με while maintaining consistent performance, low wiring complexity, and scalability remains a significant challenge. In the present study, we report on the development of ultra-sensitive, screen-printed, multi-element strain sensing platform with integrated low-wire interconnects, designed for practical deployment on aerospace components. Two types of sensor configurations were developed for application-specific use: flexible (FS-PET) for bending dominated and stretchable (SS-PDMS) for tensile dominated loading. The sensors embedded printed connection pads to minimize wiring complexity and simplify data acquisition. The sensors were validated on aerospace-grade coupons under an engineering-relevant strain range of 0–3000 µε. Both exhibited high sensitivity (GF ∼69.06 for FS-PET and ∼63.99 for SS-PDMS), along with excellent linearity ( R 2 ∼ 0.97), low hysteresis (0.075) and stable repeatability up to 50,000 cycles. The key contribution of this work lies in demonstrating a deployable, low-wire, multi-element sensing system that bridges the gap between material-level flexible sensors and practical SHM implementation for aerospace ground testing.
No takes yet. Share an insight, caveat, or question.
Pathak et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: