Answers are grounded in this paper and cite their sources.
Vanadium oxide composites with conducting polymer poly(3,4-ethylenedioxythiophene) (PEDOT) were obtained by one-step microwave-assisted hydrothermal synthesis at two different temperatures: 120 and 170 °C (denoted as V-120 and V-170, respectively). The structure and composition of the obtained samples were characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD) analysis, X-ray photoelectron spectroscopy (XPS), and thermogravimetric (TG) analysis. The detailed study of the electrochemical properties of the composites as cathodes of aqueous zinc-ion battery was performed by cyclic voltammetry (CV), galvanostatic charge-discharge (GCD) at different current densities and by electrochemical impedance spectroscopy (EIS). It was shown that V-120 demonstrated excellent electrochemical performance in the 0.3 to 1.4 V vs. Zn/Zn2+ potential range reaching specific capacities of up to 390 mA∙h∙g−1 at 0.3 A∙g−1 with excellent capacity stability after 1000 charge-discharge cycles. Its functional parameters were found to be much better than those of the electrodes based on the V-170 composite obtained at a higher temperature. The effect of the synthesis temperature on the electrochemical properties is discussed in terms of the crystallographic, compositional, and thermogravimetric properties of the samples.
No takes yet. Share an insight, caveat, or question.
Volkov et al. (2023) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: