Answers are grounded in this paper and cite their sources.
The electrical characteristics and reliability of the aluminum oxide (Al2O3) metal-oxide-semiconductor (MOS) capacitors were investigated under low-temperature process consideration. The simple cost-effective technique in preparing the Al2O3/SiO2bilayer structure as the high-kgate dielectrics was demonstrated in this paper. SiO2was prepared by room-temperature anodic oxidation, and Al2O3was fabricated by room-temperature in situ natural oxidation during the dc sputtering of aluminum in Ar/O2ambient. Compared to the Al2O3MOS capacitors without nitric acid (HNO3) compensation, significant improvements in electrical characteristics, reliability, and uniformity were achieved by utilizing HNO3to moderately oxidize the existing Al2O3layer. In addition, the charge trapping behaviors of our samples were also studied by time-dependent dielectric breakdown under the 1000-s constant voltage stress and constant current stress tests. It was found that the electron trapping is dominant under a low negative bias stress. However, under a high negative bias stress, the Al2O3MOS capacitors show hole trapping due to the impact ionization near the SiO2/Si interface. The in situ oxidation in sputtering with HNO3compensation is suitable for future low-temperature dielectric applications.
No takes yet. Share an insight, caveat, or question.
Lin et al. (2011) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: