Answers are grounded in this paper and cite their sources.
This study investigates the influence of pixel miniaturization and photoresist-defined pixel structures on the performance of green bottom-emission OLEDs for microdisplay applications. OLEDs with an ITO/HAT-CN/TAPC/TCTA:Ir(ppy)2(acac)/B3PYMPM/Liq/Al structure were fabricated on ITO-coated glass substrates. A 2 mm×2 mm single-pixel OLED and micro-pixel OLED arrays with pixel sizes from 100 μm×100 μm to 10 μm×10 μm were prepared using a photolithography-based process. Their current density, luminance, current efficiency, electroluminescence spectrum, and angular luminance distribution were evaluated. The PR pattern defining the emission area can act similarly to a pixel-defining layer, restricting the effective emission aperture and modifying the propagation path of obliquely emitted light. Angular luminance measurements showed that the micro-pixel OLED maintained emission near the normal direction but exhibited a sharp luminance decrease at high viewing angles. These results indicate that PR-induced boundary effects and angle-dependent optical losses are critical factors in designing high-resolution micro-OLED displays.
No takes yet. Share an insight, caveat, or question.
Bae et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: