Answers are grounded in this paper and cite their sources.
The transverse load and temperature sensitivities of fibre Bragg gratings (FBGs) fabricated in a range of commercially available stress and geometrically induced high birefringent (HiBi) fibres have been experimentally investigated. The wavelength reflected by the FBG in each polarization eigenmode was measured independently and simultaneously using a custom designed interrogation system. The highest transverse load sensitivity, of 0.23 ± 0.02 nm/(N/mm), was obtained with HiBi FBGs fabricated in elliptically clad fibre. This was higher than for any other HiBi fibre, which, coupled with the small diameter of the fibre, makes it a good candidate for an embedded or surface mounted strain sensor. The highest temperature sensitivity of 16.5 ± 0.1 pm °C −1 , approximately 27% greater than any other fibre type, was obtained with the HiBi FBG fabricated in Panda fibre. HiBi FBG sensors fabricated in D-clad fibre were the only ones to exhibit identical temperature sensitivities for the slow and fast axes (11.5 ± 0.1 pm °C −1 ).
No takes yet. Share an insight, caveat, or question.
Chehura et al. (2004) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: