Answers are grounded in this paper and cite their sources.
Benefitting from the advancement of digital electronics in the 20thcentury, sensors have also gradually evolved from analog to digital. As semiconductor components are required in digital sensors, a power supply is still needed for the sensor. To eliminate the need for a power supply a concept of passive digital sensing is proposed. Different from the semiconductor-based electrical digital sensing method, the parameter to be measured is first converted to a mechanical signal, then the mechanical signal is encoded to multiple digital bits by a passive digitizer, where each bit is identified as open or short state that is detectable by general IO ports. To demonstrate the proposed sensing concept, a passive RFID temperature sensor is implemented using a bimetallic coil as the temperature sensing unit. The 6-bit binary codes are acquired and transmitted by a passive RFID that is powered by an energy harvester. The test results show that the temperature sensor has a measurement sensitivity of 1.32 °C/bit and a working distance over 10 meters.
No takes yet. Share an insight, caveat, or question.
Zhu et al. (2020) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: