A 80-gbit/s D-type flip-flop circuit using InP HEMT technology

80-Gbit/s operation of a static D-type flip-flop (D-FF) circuit was achieved using InP-based HEMT technology, which has a cut-off frequency of 245 GHz and a transconductance of 1500 mS/mm. The circuit was designed with differential operation based on source-coupled FET logic (SCFL). To overcome deterioration of the 80-GHz clock signals in a single-ended to differential signal converter in the input buffer, a rat-race circuit was used as a converter. Measurements showed that the circuit achieved a gain of over 2 dB higher than a conventional converter using a differential pair circuit, and power consumption was reduced from 380 to 260 mW. The power supply voltage was -5.7 V, and total power consumption was 1.2 W. Since there is no commercially available 80-Gbit/s-pulse pattern generator, we developed a selector module to measure the D-FF. These measurements showed that the D-FF successfully operated at 80 Gbit/s, which is almost twice the speed reported to date.