Answers are grounded in this paper and cite their sources.
Isothermal annealing before or after irradiation is found to have a definite effect upon the thermoluminescent glow curve of LiF (TLD-100). Post-irradiation annealing, by thermally releasing electrons from their traps, reduces the size of each peak in the glow curve. The two main dosimetry peaks each have a simple exponential decay consistent with the model of Randall and Wilkins, indicating trap depths of 1.19 and 1.25 eV respectively with frequency factors between 1011 and 1012 sec−1. Pre-irradiation annealing at 80°C for 24 hr reduces the area of the low temperature peaks by a factor of 10, while annealing at 125°C, 145°C or 175°C for 3 hr reduces the area of the main dosimetry peaks by a factor of 2–5 and increases the height of one of the low temperature peaks by a factor of 12-3. The rate of cooling from temperatures greater than about 150°C affects the glow curve also. Rapid cooling in times of the order of seconds increases the heights of the low temperature peaks up to a factor of 4 compared to cooling in several minutes or more.
No takes yet. Share an insight, caveat, or question.
Zimmerman et al. (1966) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: