Answers are grounded in this paper and cite their sources.
Multi-walled carbon nanotubes (MWCNTs) functionalized with amine and carboxyl groups were used to prepare polyurethane/MWCNT nanocomposites in two distinct concentrations: a lower value of 1 mass% (spray coating) and a higher one of ~50 mass% (buckypaper based). The MWCNT-NH2 sample contained only 0.5 mass% of amine groups, whereas MWCNT-COOH contained 5 mass% of carboxyl groups. The MWCNT functionalized with low amine group content showed improved thermal properties when compared to neat thermoplastic polyurethane (TPU) and MWCNT-COOH based nanocomposites. The electrical conductivity of the polyurethane elastomer was greatly increased from 10-12 to ~10-5 S cm-1in the 1 mass% nanotube composite and to 7 S cm-1for the MWCNT-NH2 buckypaper-based nanocomposite. Furthermore, the relative high content of functional groups in the MWCNT-COOH sample, which disrupt the sp²structure in the nanotube walls, led to inferior properties; for instance the conductivity of the buckypaper based composite is one order of magnitude lower when using MWCNT-COOH in comparison with the MWCNT-NH2. These results show the range of property design possibilities available with the elastomeric polyurethane nanocomposite by tailoring the functional group content and the carbon nanotube load.
No takes yet. Share an insight, caveat, or question.
Lima et al. (2012) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: