Answers are grounded in this paper and cite their sources.
Experimental analysis demonstrates optimal rare earth addition refines microstructure and enhances wear resistance in pearlite rail steel, indicating excessive dosing accelerates spalling failure.
In order to clarify the regulation mechanism of rare earth elements on the Microstructure and wear resistance of heavy rail steel, the rails with different mixed rare earth additions were analyzed in this study. With the increase of rare earth content from 0.0029 wt% to 0.0090 wt%, pearlite lamellar spacing decreases, hardness increases, subsurface inclusion density decreases, wear amount decreases from 0.239 g to 0.196 g, deformation layer thickness decreases, and surface crack depth and deflection angle decrease. The main failure mechanism is plowing wear, which is attributed to the inhibition of crack propagation by hardness improvement and pearlite refinement. When the rare earth content is further increased to 0.0131 wt%, pearlite lamellae are transformed into short rods and granules, the hardness decreases, the density of subsurface inclusions increases, the wear amount rises to 0.209 g, and the deformed layer thickens. The main failure mode changes to spalling wear, which is due to the fact that short bar/granular pearlite reduces structural continuity and promotes crack initiation and propagation, especially the increase of subsurface inclusions intensifies crack nucleation, propagation and merger.
No takes yet. Share an insight, caveat, or question.
Cen et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: