Answers are grounded in this paper and cite their sources.
Barium and calcium stearate Langmuir films from 1 to 10 monolayers in thickness (approximately 25–250Aå) have been investigated for use as ultrathin insulating barriers between evaporated metal electrodes. These metal‐insulator‐metal sandwiches showed highly nonlinear and temperature dependent conduction characteristics, from which a thermal barrier height of 0.25–0.30 ev is calculated. Reproducibility of electrical properties however was poor, apparently due to voids and inhomogeneities in the organic insulating films. It is calculated that even in the best samples, 2 to 3 monolayers were required to eliminate voids penetrating completely through the organic films. A reactive and hence oxidized surface was found to be necessary for the formation and retention of low porosity layers, tin being the most successful substrate electrode material. Insulating behavior could not be obtained from films transferred onto gold electrodes. Film structure and adhesion was investigated by studying the layering process and the autoradiographs obtained from C 14 tagged films. The autoradiographs did not reveal any significant defects in the layers down to the resolution of the negatives (∼25μ). It was found that the physicochemical nature of the substrate surface affected the adhesion of more than the first monolayer, and that porosity alone was unlikely to account for the long‐range effect. Positive ion adsorption, as described by Goranson and Zisman, is suggested as a possible alternative and shown to be consistent with some aspects of the electrical measurements.
No takes yet. Share an insight, caveat, or question.
Handy et al. (1966) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: