Answers are grounded in this paper and cite their sources.
Efficient charge collection is one of the most important factors to achieve high power conversion efficiency for the bulk-heterojunction solar cells based on polymer blend films. We report enhanced hybrid polymer solar cells based on blends of a semiconducting polymer poly[2-methoxy-5-(2′-ethylhexyloxy)-1,4-phenylene vinylene] (MEH-PPV) as electron donor and crystalline n-type ZnO nanoparticle as electron acceptor by using p-type semiconducting Cu 2 O nanocrystal as an anode buffer layer between the indium tin oxide (ITO) anode and the MEH-PPV:ZnO blend layer. The p-type Cu 2 O nanocrystals of 30−40 nm diameter dispersed on ITO anode surface percolate into the MEH-PPV:ZnO blend layer serving as hole collection antenna to efficiently collect holes. The results show that the charge recombination in the MEH-PPV:ZnO blend layer resulting from low charge mobility of MEH-PPV is effectively restrained via hole-transport bypass of Cu 2 O nanocrystals. Compared to the control device with poly(ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) as a flat anode buffer layer, the short-circuit current increases 45% for the device with Cu 2 O nanocrystal as an anode buffer layer. Moreover, the lower ionization potential of Cu 2 O nanocrystal renders the device a high open-circuit voltage compared to the device with PEDOT:PSS as an anode buffer layer. The optimal device with Cu 2 O nanocrystal as an anode buffer layer shows a power conversion efficiency of 2.0%, a 132% increase compared to the device with PEDOT:PSS as an anode buffer layer.
No takes yet. Share an insight, caveat, or question.
Shao et al. (2010) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: