Answers are grounded in this paper and cite their sources.
High-performance RF/mm-Wavefront ends often require in situ sensing circuitries to monitor performance metrics and drive their built-in-self-test (BiST) algorithms for performance recovery or optimization. In large-scaled integrated phased-arrays, antenna coupling often results in dynamic beam-dependent impedance variations [antenna voltage standing wave ratio (VSWR)] and front-end degradation, necessitating in situ load-invariant power/impedance sensors. However, the state-of-the-art mm-Wave sensors only demonstrate sensing at a single frequency, instead of the entire frequency band of interest with limited accuracy over antenna VSWR. Therefore, we propose a broadband current/voltage sensing-based VSWR resilient true power/impedance sensor supporting single-ended interfaces using the GlobalFoundries 45 nm CMOS SOI process. Comprehensive theoretical analyses of the coupling mechanisms and analog multiplier architectures are presented. Sources of error for power sensing are highlighted in detail. At 34 GHz, the proposed sensor measures the power sensing error(PSE) ≤ ± 1dB for 3:1 VSWR and ±0.5 dB for 2:1 VSWR. Over 22–41 GHz, the measured PSE is≤ ± 3.4dB for 3:1 VSWR and ±1.5 dB for 2:1 VSWR. In addition, the proposed sensor under a 50Ωload demonstrates a maximum dynamic range of 22.89 dB at 42 GHz and a dynamic range$>21.46$dB over 27–41 GHz. At 33 GHz, the measuredΓ /∠ Γerrors are≤ 0.072/7.3° for 3:1 VSWR and≤0.04/7.13° for 2:1 VSWR, while demonstratingΓ /∠ Γerrors of≤ 0.2/34° for 3:1 VSWR and≤ 0.11/27° for 2:1 VSWR over the entire 27–41 GHz BW. The chip die occupies an area of 0.97×1.99mm and a sensor core area of 0.48×1.66mm.
No takes yet. Share an insight, caveat, or question.
Munzer et al. (2022) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: