Answers are grounded in this paper and cite their sources.
The results are discussed of a systematic study by means of optical microscopy, high-resolution and high-voltage electron microscopy of the lattice defects introduced in Czochralski silicon wafers with a high interstitial oxygen concentration during single and two-step heat treatments. In the low temperature region 550 to 1000 °C, rod-shaped coesite precipitates, platelike amorphous SiOx precipitates, 60° and 90° dislocation dipoles, and prismatic loops may be identified. The oxygen precipitation behaviour is shown to be consistent with a homogeneous nucleation mechanism. The dislocation dipoles and loops grow due to the supersaturation of the silicon self-interstitials which is induced by the precipitation of the oxygen. After a subsequent high temperature step (1150 °C) the defect spectrum changes severely. A wide range of different types of defects can be distinguished: Frank-type stacking faults, (a/6) 〈114〉-type stacking faults, elongated dislocation loops, prismatic loops, truncated octahedral amorphous SiOx precipitates, and platelike SiOx precipitates with prismatic dislocation loops. These defects nucleate heterogeneously on the defects present due to the low-temperature step. The different mechanisms involved will be discussed.
No takes yet. Share an insight, caveat, or question.
H. Bender (1984) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: