Key result
The compression force necessary to inhibit motion at the osteotomy site during fixation was significantly lower with a hook pin (48 N) compared to a sliding hip screw (214 N) and other devices.
The hook pin requires less compression force to prevent motion at the fracture site compared to other devices, potentially causing less vascular damage during internal fixation of femoral neck fractures.
Answers are grounded in this paper and cite their sources.
May suggest less vascular damage with hook pins in femoral neck fixation; leaves open whether this improves clinical outcomes.
On human cadaveric femora, internal fixation of cervical osteotomies was performed with four different devices. With the use of a lever, a static force was applied through the acetabulum to the osteotomy site. Motion at the osteotomy site was measured by two strain gauges. The compression force necessary to inhibit motion at the osteotomy site during the fixation procedure was measured. This force was lower with a hook pin than with the other devices. During surgery in 12 patients with displaced femoral neck fractures, the forces holding the fracture surfaces together were measured with a dynamometer. The force at which widening of the fracture gap was observed by fluoroscopy was recorded. In seven fractures, the mean compression force was 110 (60-170) N. The remaining five fractures did not open up when pressures of up to 200 N were applied. These forces were always greater than the hook pin forces measured in the cadaver experiments, but often less than the forces obtained with the other devices.
No takes yet. Share an insight, caveat, or question.
Elmerson et al. (1987) studied Displaced femoral neck fractures (n=27). Hansson hook pin vs. Richards sliding hip screw, Gouffon pin, and Rydell four-flanged nail was evaluated on Compression force applied across the osteotomy necessary to inhibit movement of the femoral head during internal fixation (p=<0.001). The compression force necessary to inhibit motion at the osteotomy site during fixation was significantly lower with a hook pin (48 N) compared to a sliding hip screw (214 N) and other devices.
Synapse has enriched 10 related papers. Consider them for comparative context: