Answers are grounded in this paper and cite their sources.
GaN UV metal–semiconductor–metal photodetectors (MSM PDs) with an unactivated Mg-doped cap layer and sputtered indium tin oxide (ITO) were fabricated. Compared with conventional MSM PDs without a cap layer, it was found that we could achieve a significantly much smaller dark current, larger UV to visible rejection ratio, and larger normalized detectivity by inserting an unactivated Mg-doped GaN cap layer. The dark leakage current for the MSM PDs with an unactivated Mg-doped GaN cap layer was shown to be about ten orders of magnitude smaller than that for the conventional MSM PDs. Under a 0.5 V bias, the measured responsivity and UV-to-visible rejection ratio were 0.017 A/W and , respectively, for the MSM PDs with an unactivated Mg-doped GaN cap layer. This result could be attributed to the thicker and higher potential barrier and effective surface passivation after inserting this in situ grown cap layer. With a 1 V applied bias, it was also found that we could achieve a lower noise level and a higher normalized detectivity of by inserting an unactivated Mg-doped GaN cap layer into MSM PDs.
No takes yet. Share an insight, caveat, or question.
Lee et al. (2008) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: