Answers are grounded in this paper and cite their sources.
Gas source molecular beam epitaxy with ammonia was used to grow AlxGa1−xN on Si(111). Three types of buffer layers, containing AlN, AlGaN/AlN, and AlGaN/GaN short period superlattices, were used and their effectiveness evaluated by x-ray diffraction. We determined that a combination of AlN buffer layer, prepared under the two-dimensional growth mode, with a short period superlattice of AlGaN/GaN results in the highest quality AlGaN. Under optimized growth conditions, x-ray diffraction coherence length almost equal to the layer thickness was obtained for low Al content layers. The normalized coherence length was reduced to ∼0.4 for x=0.66 and it increased again to ∼0.75 in AlN. From room temperature band edge cathodoluminescence of AlGaN grown on Si(111) we determined the alloy bowing coefficient of b=1.5 eV, in good agreement with previous results obtained by absorption measurements.
No takes yet. Share an insight, caveat, or question.
Nikishin et al. (2000) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: