Answers are grounded in this paper and cite their sources.
A new oscillating mode of pyrolyser operation is proposed, in which the pyrolysis of Wood Birch biomass particles in a fixed bed is carried out under the influence of two external sources of thermal energy by electric heating of the inner and outer heating surfaces. The pyrolyser is located in the space between the 220 mm diameter enclosing tube and the 150 mm diameter inner tube. The height of the pyrolyser is 225−450 mm. The biomass pyrolysis process is cyclical. After the pyrolyser heating surfaces are heated to a temperature of 950 °С, biomass with a temperature of 100 °С is fed into it, resulting the surface temperature drops from 950 °С to 470 °С. At the initial moment of time, specific heat fluxes qr=0.11+XII = qr=0,075– = 150,000 Wt/m2 are supplied to the heating surfaces of the outer and inner cylinders. Upon reaching the wall temperature of the pyrolyser 1000 °С, the specific heat flux drops by 10 % due to a 10 % decrease in the current, which in turn leads to a decrease in the wall temperature. Then the process repeats. A sharp increase in the wall temperature to 1000 °С and a 10 % drop in the specific heat flux are observed. Thus, in the oscillating mode of operation, the pyrolyser manages to keep the wall temperature below 1000 °С throughout the entire cycle. The time for heating the particle bed to a minimum temperature of 638 °С is 40 s, resulting in a bed heating rate of 957 °С/min. At the outlet of the pyrolyser, a reformer is installed for the thermal decomposition of high molecular weight compounds of tarry substances under the influence of high temperatures. The reformer consists of an inner pipe with a diameter of 172.3 × 2 mm, enclosed by a jacket with a diameter of 192.3 × 2 mm and a length of 3.5 m. Flue gases with a temperature of 1255.8 °С in the amount of 94.8 kg/h enter the intertube gap and give off their heat to pyrolysis gas in the amount of 39.2 kg/h and tar in the amount of 2.32 kg/h. Bibl. 32, Fig. 12, Tab. 5.
No takes yet. Share an insight, caveat, or question.
Рохман et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: