Answers are grounded in this paper and cite their sources.
Role of O2 in aluminum etching process using BCl3/Cl2/O2 plasma was investigated in inductively coupled plasma (ICP) etching system. Optical emission spectroscopy (OES) of BCl3/Cl2/O2 plasmas shows that reaction between oxygen and boron chloride occurs in the presence of O2. This reaction seems to result in increase of aluminum etchant chlorine radicals and generation of B x O y species. Increase of chlorine radicals may play role to enhance aluminum etch rate at relatively low O2 concentration (≤6%). As the concentration of O2 increased, local etch stop of aluminum was observed along the aluminum grain boundary at 9% O2 and it was extended to cause etch stop on all exposed surface at 15% O2. Two possible causes of etch stop (i.e. deposition of reaction byproduct B x O y species and surface oxidation of aluminum) were postulated and examined. Investigation of these possibilities shows that the major cause of etch retardation, in the presence of O2, is surface oxidation of aluminum rather than the formation of inhibitor layer via the deposition of B x O y species.
No takes yet. Share an insight, caveat, or question.
Baek et al. (1999) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: