Answers are grounded in this paper and cite their sources.
Conventional viscoelastic dampers (VEDs) are limited in cold-region applications because their viscoelastic materials are highly temperature-sensitive and exhibit markedly reduced deformability and damping capacity at low temperatures. To address this limitation, a high-damping SIS-NR viscoelastic material with improved low-temperature adaptability was developed by blending natural rubber (NR) with styrene-isoprene-styrene (SIS) block copolymer using AO-80 as a compatibilizer. Microstructural characterization and dynamic mechanical analysis (DMA) were carried out to investigate the microphase separation, modulus, and damping behavior of the material, whereas tensile and shear tests at different temperatures and strain levels were performed to evaluate its macroscopic mechanical properties.Based on the developed material, a high-damping SIS-NR VED was fabricated and subjected to cyclic shear tests under low-temperature and large-deformation conditions. In addition, a four-element shear rheological constitutive model was established to characterize the nonlinear mechanical behavior of the damper. The results show that the developed SIS-NR viscoelastic material maintains a loss factor (tan δ ) above 0.32 over a temperature range of −20–40 °C. Even at −20 °C and 200% shear strain, the fabricated damper achieved an equivalent damping ratio of 26.5%. These results indicate that the proposed high-damping SIS-NR VED combines excellent low-temperature damping performance with good large-deformation adaptability, showing strong potential for structural vibration mitigation in cold regions.
No takes yet. Share an insight, caveat, or question.
Liang et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: