Answers are grounded in this paper and cite their sources.
Magnetic composites are the most widely-used microwave absorbing materials (MAMs), but for low-frequency absorption, their heavy weight caused by the increasing thickness has always been the major drawback. Recently, the flexible manipulation on reflected/refracted wave realized by phase gradient metasurfaces (PGMs) has attracted much attention. Here, this manipulation ability is applied to enhance low-frequency performance of thin-layer magnetic MAMs. The −10 dB absorption band of the 1 mm thick MAM here is 8.4–13.6 GHz. A polarization conversion PGM working in low-frequency range is achieved by designing a sub-cell that contains an anchor-shaped metallic pattern. Six sub-cells with different sizes are properly arranged to ensure 2π phase change of the formed super-cell. With this PGM, the incident wave can be abnormally reflected when f > 4.17 GHz and coupled into surface wave when f < 4.17 GHz. Through placing the PGM under the 1 mm MAM, the low-frequency performance can be significantly improved, achieving −10 dB absorption band of 2.8–6.2 GHz. A corresponding sample with surface density of only 7.24 kg/m 2 was fabricated and the experimental result agrees with the simulation result. This work provides an effective approach to enhance low-frequency performance of thin-layer magnetic MAMs with light weight, which has important application value.
No takes yet. Share an insight, caveat, or question.
Guo et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: