Answers are grounded in this paper and cite their sources.
Voltage scaling is desirable in static RAM (SRAM) to reduce energy consumption. However, commercial SRAM is susceptible to functional failures whenVDDis scaled down. Although several published SRAM designs scaleVDDto 200-300 mV, these designs do not sufficiently consider SRAM robustness, limiting them to small arrays because of yield constraints, and may not correctly target the minimum energy operation point. We examine the effects on area and energy for the differential 6T and 8T bit cells asVDDis scaled down, and the bit cells are either sized and doped, or assisted appropriately to maintain the same yield as with fullVDD. SRAM robustness is calculated using importance sampling, resulting in a seven-order run-time improvement over Monte Carlo sampling. Scaling 6T and 8T SRAMVDDdown to 500 mV and scaling 8T SRAM to 300 mV results in a 50% and 83% dynamic energy reduction, respectively, with no reduction in robustness and low area overhead, but increased leakage per bit. Using this information, we calculate the supply voltage for a minimum total energy operation (VMIN) based on activity factor and find that it is significantly higher for SRAM than for logic.
No takes yet. Share an insight, caveat, or question.
Chen et al. (2009) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: