Answers are grounded in this paper and cite their sources.
Conventional low-voltage (LV) static random access memories (SRAMs) utilizing separate read-and-write assist circuits sacrifice access speed too much, leading to poor energy efficiency. Overlaying additional assist circuits to enable power-saving modes can exacerbate speed loss and energy inefficiency. This work proposes a coordinated read-write-hold-retention-shutdown (SD) assist circuit design for SRAMs to improve speed at low VDD and reduce leakage current in active and power-saving modes. This leads to overall power reduction and enhanced energy efficiency. The implemented 22-nm 256-Kb SRAM can operate down to 0.45 V, with the minimum energy point at 0.5 V. At 0.5 V, TT corner, and 25∘C, the measured maximum frequency (fₘₐₓ) is 125 MHz with a 10 aJ/bit active energy, representing a 6.25 higher frequency with a 91% energy reduction, compared to the state-of-the-art 0.5-V SRAM in 28-nm bulk CMOS. The SRAM has a 12 pW/bit deep-sleep power and a 10 pW/bit SD power at 0.5 V.
No takes yet. Share an insight, caveat, or question.
Wang et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: