Answers are grounded in this paper and cite their sources.
The 0.65Pb(Mg 1/3 Nb 2/3 )O 3 -0.35PbTiO 3 (PMN-PT) epitaxial thin films were grown on LaNiO 3 /CeO 2 /yttria-stabilized zirconia buffered Si(001) substrates at 600°C in a working pressure of 300 mTorr using pulsed laser deposition. The microstructural and the electrical properties of the films were investigated as a function of the film thickness. The high resolution x-ray diffraction and transmission electron microscopy results reveal that the 800-nm thick PMN-PT films grown at 600°C exhibit the epitaxial nature with a pure perovskite structure. The PMN-PT films exhibit a high dielectric constant of about 1991 and a low dissipation factor of 0.04 at a frequency of 10 kHz. A good polarization versus electric field hysteresis characteristic with remanent polarization of 12.5 µ C/cm 2 and a coercive field of 30 kV/cm was obtained on the 800-nm thick PMN-PT films. The presence of a pyrochlore phase in the films has a critical influence on the dielectric and the ferroelectric properties.
No takes yet. Share an insight, caveat, or question.
Jiang et al. (2011) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: