Answers are grounded in this paper and cite their sources.
Measurements were made to assess the AC breakdown voltages in liquid nitrogen (LN/sub 2/) with different electrode configurations such as sphere-sphere, needle-needle, hemisphere-hemisphere, plane-plane, sphere-needle, etc. Experimental results reveal that the breakdown voltage is a function of electrode geometry and gap length. This study also addresses the effect on the breakdown strength of solid insulating materials under LN/sub 2/ environment with a sphere-sphere electrode configuration. In this paper, special emphasis has been attributed to the effect on loss index of a variety of dielectrics dipped in LN/sub 2/. The measured values of breakdown strength and loss index have been compared with those obtained under atmospheric condition. The study reveals that the breakdown strength of cellulosic materials like paper or pressboard increases manifold while the loss index decreases significantly when dipped in LN/sub 2/ with variations of the order of 50% to 90%. However, for impervious noncellulosic materials like Perspex (acrylic glass) or presspahn, the increase in breakdown strength is not that pronounced and the decrease in loss index is of the order of 2 to 30%.
No takes yet. Share an insight, caveat, or question.
Husain et al. (2002) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: