This is the authors' abstract. We don't add key points for this paper.
Use of boron and arsenic diffusions through an emitter polysilicon film (borosenic-poly emitter-base process) produces a transistor base width of less than 100nm with an emitter junction depth of 50 nm and an emitter-to-base reverse leakage current of approximately 70 pA. The borosenic-poly process resolves both the channeling and shadowing effects of a sidewall-oxided spacer during the base boron implantation. The process also minimizes crystal defects generated during the emitter and base implantations. The coupling-base boron implant significantly improves a wide variation in the emitter-to-collector periphery punchthrough voltage without degrading the emitter-to-base breakdown voltage current gain, cutoff frequency, or ECL gate delay time. A deep trench isolation with 4- mu m depth and 1.2- mu m width reduces the collector-to-substrate capacitance to 9 fF, while maintaining a transistor-to-transistor isolation voltage of greater than 25 V. The application of self-aligned titanium silicide technology to form polysilicon resistors without holes and to reduce the sheet resistance of the emitter and collector polysilicon electrodes to 1 Omega /square is discussed.>
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Yamaguchi et al. (1988) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: