Answers are grounded in this paper and cite their sources.
Polyethylene glycol (PEG)-based membranes have recently been reported with excellent CO 2 separation performances. However, the commonly exhibited high crystallinity may deteriorate the gas permeation properties in this type of membrane. In this work, a two-stage cross-linking method was employed to fabricate PEG membranes with interpenetrating networks to reduce the crystallinity. Ionic liquids (ILs) were incorporated into the resultant membranes to further increase CO 2 diffusivity and the CO 2 affinity of the membranes. By increasing the length of the PEG-based acrylate monomers and optimizing the ratio of the amine-functionalized cross-linker to the acrylate monomers, we significantly enhanced the CO 2 permeability of the resultant membranes (from 0.6 to 85.0 Barrer) with slightly increased CO 2 /N 2 selectivity. Four conventional ILs (i.e., [Bmim][BF 4 ], [Bmim][PF 6 ], [Bmim][NTf 2 ] and [Bmim][TCM]) with different anions were added into the optimized cross-linked PEG membranes. The addition of ILs endows superior gas transport properties at high loadings, and the [Bmim][TCM] gives the best CO 2 separation performance of the membranes; CO 2 permeability of up to 134.2 Barrer with the CO 2 /N 2 selectivity of 49.5 was documented. The anions in ILs were found contributing the most in promoting the CO 2 permeation, and the higher CO 2 affinity endows the better CO 2 separation performance in the resultant membranes.
No takes yet. Share an insight, caveat, or question.
Deng et al. (2019) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: