Answers are grounded in this paper and cite their sources.
We have studied various cleaning procedures for obtaining atomically clean, well-ordered surfaces of GaAs(100) and (110). We have evaluated the resulting surfaces by angle resolved ultraviolet photoelectron spectroscopy (ARUPS), x-ray photoelectron spectroscopy (XPS), and low energy electron diffraction (LEED). We report results for thermally cleaned, ion bombarded and annealed, and ion bombardment at elevated temperature cleaning procedures. The most reproducible results, giving the best, lowest background LEED patterns and the sharpest ARUPS results, were obtained from the elevated temperature ion bombardment cleaned samples. Our thermally cleaned samples, while showing low impurity concentrations to XPS studies, had a relatively high background LEED pattern. The ARUPS results were not indicative of a high degree of surface order; the normal emission spectra more resemble angle integrated UPS results. The room temperature ion bombarded samples, followed by anneals of 30 min at temperatures up to 520 °C, yielded a high quality 1×1 pattern on a GaAs(100) surface, but no higher order reconstruction could be obtained. The ion bombardment typically used in this work was 200 eV Ar ions. Substrate temperature during bombardment were varied from 300 to 800 K. Post anneals were also examined. Temperatures of 300 °C were quite adequate to obtain a high quality 1×1 LEED pattern on both (100) and (110) surfaces. Post anneals at 520 °C yielded a low background (8×2) Ga surface.
No takes yet. Share an insight, caveat, or question.
Oelhafen et al. (1983) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: