Answers are grounded in this paper and cite their sources.
Carbon-fiber-reinforced polymer (CFRP) composites are widely used in lightweight aerospace structures because their mechanical performance can be adapted to different structural requirements through appropriate manufacturing conditions. This study investigates the influence of curing temperature applied using temperature-controlled heated molds on the mechanical and thermo-mechanical behavior of vacuum-infused CFRP laminates manufactured with an IN2 epoxy infusion resin. Laminates were cured at room temperature (25 °C) and at 40, 50, 60, and 70 °C using heated molds. Their performance was evaluated by tensile testing, three-point bending, and heat deflection temperature (HDT) measurements. The highest tensile strength (675.06 MPa) was obtained for laminates cured at 40 °C, whereas increasing the curing temperature beyond this value did not provide further improvement in tensile performance. The highest flexural stress at the first peak (983.36 MPa) and flexural modulus (67.17 GPa) were obtained for laminates cured at 70 °C, while the highest energy absorption during bending (0.57 J) was measured for laminates cured at 40 °C. The HDT increased from 59.77 °C for room-temperature curing to 87.60 °C for laminates cured at 70 °C, indicating improved thermo-mechanical stability with increasing curing temperature. The results indicate that no single curing temperature simultaneously maximized the tensile, flexural, and thermo-mechanical properties. Instead, the optimum curing temperature depended on the specific mechanical and thermo-mechanical requirements of the intended application. The results further indicate that controlling the temperature of heated molds during manufacturing provided a practical approach for tailoring the mechanical and thermo-mechanical performance of CFRP laminates without modifying the reinforcement architecture, laminate stacking sequence, or constituent materials.
No takes yet. Share an insight, caveat, or question.
Stroe et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: