Answers are grounded in this paper and cite their sources.
Transitions from E to H mode in electrodeless discharges created in pure oxygen at pressures from 10 Pa to 160 Pa are studied. An RF coil is placed at the centre of a long quartz tube and connected to an RF generator via a matching network. The generator operates at a frequency of 13.56 MHz and adjustable power up to 1200 W. The voltage and current on the coil are measured with a commercial voltage probe and a current probe connected to an oscilloscope, while the density of neutral O-atoms is measured with a catalytic probe. The results show the appearance of current and voltage hysteresis at moderately low pressure, the hysteresis being more pronounced at higher pressure. The O-atom density does not depend much on the mode at low pressure. As the pressure increases, a rapid increase of the O-atom density is observed at the transition between the E and the H mode. The hysteresis in the O-atom density is observed as well.
No takes yet. Share an insight, caveat, or question.
Zaplotnik et al. (2011) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: