This is the authors' abstract. We don't add key points for this paper.
In this work, we report a facile and tunable electrodeposition approach for engineering polyacrylic acid (PAA)-modified Co3O4 electrodes on nickel foam for high-performance asymmetric pouch-type supercapacitors. By systematically varying the PAA concentration (0.5 wt %, 1 wt %, and 1.5 wt %), we demonstrate that the CO-1 sample (1 wt % PAA) exhibited the most optimized structure and electrochemical behavior. The CO-1 electrode delivered a remarkable areal capacitance of 3467 mF/cm2 at 30 mA/cm2, attributed to its interconnected nanosheet morphology, enhanced ion diffusion, and reversible Co2+/Co3+/Co4+ redox transitions. Electrochemical impedance spectroscopy confirmed low internal resistance (0.4267 Ω), while kinetic analysis revealed a dominant diffusion-controlled charge storage contribution of 91.7%. To evaluate practical applicability, an asymmetric pouch-type supercapacitor device was assembled using CO-1 as the positive electrode and activated carbon as the negative electrode. The device operated efficiently within a 1.6 V window, achieving an impressive areal capacitance of 157 mF/cm2, an energy density of 0.056 mWh/cm2, a power density of 1.9 mW/cm2, and excellent cycling stability. This study underscores the critical role of polymer-assisted growth in tailoring electrode architecture and provides a promising route for integrating cost-effective and scalable supercapacitor devices into next-generation energy storage technologies.
Answers are grounded in this paper and cite their sources.
No takes yet. Share an insight, caveat, or question.
Amate et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: