Answers are grounded in this paper and cite their sources.
In an effort to provide a more sustainable and environmentally friendly alternative, the current study intends to address the issue of Bauxite Tailings (BT) disposal and to study Graphene Oxide’s (GO) efficient use in geopolymer concrete. The compressive strength of alkali-activated GO-reinforced geopolymer mortar with 40% BT and 60% Ground Granulated Blast Furnace Slag (GGBS) as its precursors under ambient curing was evaluated with different molarities such as 4 M, 6 M, 8 M, and 10. GO was added to the binder at weight ratios of 0.025 wt.%, 0.05 wt.%, 0.075 wt.%, 0.1 wt.%, and 0.125 wt.%, it was noticed that 0.1 wt.% GO was the optimum dosage since it accelerated the geopolymerization process and improved dissolution at a lower molarity of 4 M, resulting in a compressive strength of 47.5 MPa, which was 40.65% higher than specimens without GO. Compared to specimens without GO, the Graphene Oxide-reinforced geopolymer mortar reduced the need for NaOH by 50% which is a significant handling barrier during the production of geopolymer. The effect of geopolymerization was investigated using XRD, FTIR, and SEM to characterize the GO-reinforced geopolymer mortar, and the degree of GO dispersion was assessed using a UV-Vis spectrometer. As a result of a denser microstructure and fewer unreacted phases, the investigation’s findings validate the efficient synthesis of geopolymer gel. The experimental investigations of this study suggest effective repurposing of BT and GGBS in geopolymer where GO can serve as a nano-reinforcement to enhance its mechanical and microstructural properties and be environmentally beneficial.
No takes yet. Share an insight, caveat, or question.
Frieda et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: