Answers are grounded in this paper and cite their sources.
Alloyed Au–Ge thin films on n-GaAs are widely used for fabricating Ohmic contacts to n-type GaAs. This paper presents a systematic study of the effects of Ge concentration on the compound formation and morphology in the metallization. The lowest annealing temperature at which the compound formation at 10−6 Torr was observed for Au–Ge contacts with Ge concentrations of 0, ∼0.6, 3, and 12 wt. % Ge was 500, 500, 450, and 350 °C, respectively. Hence, Ge was found to decrease the compound formation temperature. Au7Ga2 was observed in contacts with low Ge concentrations (0 and ∼0.6 wt. % Ge), whereas α′-AuGa (or Au7Ga), a tentatively identified Au3Ga phase, and a AuGeAs ternary phase were observed in contacts with a Ge concentration of 12 wt. %. At an intermediate Ge concentration (3 wt. % Ge), both Au7Ga2 and α′-AuGa were observed. The morphology after compound formation was sensitive to the Ge concentration. In Au–Ge contacts, a change in the Ge concentration from 0 to ∼0.6 wt. % caused a sharp decrease in the aspect ratio of the aligned Au7Ga2 rectangular particles; a change from 3 to 12 wt. % Ge caused a change from a GaAs-rich matrix to a Au-rich matrix with the appearance of characteristically shaped AuGeAs patches.
No takes yet. Share an insight, caveat, or question.
Kim et al. (1986) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: