Answers are grounded in this paper and cite their sources.
The thin-layer drying behaviour of lemon balm leaves in an indirect-mode solar dryer with forced convection was investigated. The solar air heater employed a novel counter flow double-pass packed-bed wire mesh layer configuration to enhance the energy gain of the heated air. The thermal performance of the solar dryer was experimentally evaluated under Babol (36.5387°N, 52.6765°E) prevailing weather conditions. The system was comprised of a double-pass packed bed of wire mesh air heater attached to a dryer cabinet. The collector thermal efficiency was determined under realistic conditions wherein solar irradiance changed from 600 to 900 W/m 2 , atmospheric temperature varied from 22 °C to 25 °C and the collector outlet temperature ranged from 38 °C to 68 °C. It was found that while increasing the flow rate from 0.006125 m 3 /s to 0.01734 m 3 /s improved the collector thermal efficiency by ~ 20%; further increasing the flow rate to 0.034378 m 3 /s had an adverse effect on the collector efficiency. Drying experiments were performed for lemon balm leaves with initial moisture content of 80% on wet basis to the final moisture content of 10%. Mathematical models were also tested to find the best thin layer model for describing the drying behaviour of lemon balm leaves.
No takes yet. Share an insight, caveat, or question.
Shamekhi-Amiri et al. (2018) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: