Answers are grounded in this paper and cite their sources.
An up to 40% relaxed N-polar InGaN pseudosubstrate was obtained by a multistep in situ porosification technique on the N-polar GaN template using the metal–organic chemical vapor deposition (MOCVD) method. An In a Ga 1– a N/In b Ga 1– b N/GaN superlattice (SL) layer (SL A ) with a higher composition of In a Ga 1– a N ( a = 15.2%) compared to In b Ga 1– b N ( b = 8.4%) was in situ porosified and coalesced with a thin GaN layer. Following the coalescence layer, an 80 nm-thick In x Ga 1– x N/In y Ga 1– y N/GaN SL (SL B1 ) layer with x = 13% and y = 9% was deposited as a second in situ porous layer and coalesced similarly with the GaN layer. Finally, a 160 nm-thick In x Ga 1– x N/In y Ga 1– y N/GaN SL (SL B2 ) layer was deposited on top of the SL B1 and GaN coalescence layer to obtain a strain-relaxed pseudosubstrate. Up to 40% bulk relaxation of the SL B2 buffer layer was determined after a multistep porosification process. A smooth surface morphology (roughness <2 nm) along with a 50% reduction in hillock density was observed in the partially relaxed InGaN pseudosubstrate (SL B2 ). Furthermore, photoluminescence (PL) measurements showed around 80% relaxation for the near-surface SL B2 layer. The multistep in situ porosification technique demonstrated a robust approach to produce a strain-relaxed InGaN pseudosubstrate suitable for lattice engineering.
No takes yet. Share an insight, caveat, or question.
Mukhopadhyay et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: