Answers are grounded in this paper and cite their sources.
A chopped ZrO2 fiber (ZrO2(f)) reinforced CaO-based integral ceramic mold was successfully fabricated by stereolithography (SLA) and tert-butyl alcohol (TBA)-based gel-casting, and the effect of chopped ZrO2(f) content on properties of the ceramic mold was investigated. The results show that the ZrO2(f) content had a significant effect on the viscosity of CaO-based ceramic slurry, which directly affects the filling ability of slurry in complex structures of the integral mold. The tiny structures of the ceramic mold cannot be filled completely with a ZrO2(f) content exceeding 3 vol %. The sample fabricated with 3 vol % fiber content showed a harmonious microstructure and exhibited an excellent comprehensive performance with 25 °C bending strength of 22.88 MPa, an 1200 °C bending strength of 15.74 MPa, a 1200 °C deflection of 0.86 mm, and a sintering shrinkage of 0.40%, which can meet the requirements of casting very well.
No takes yet. Share an insight, caveat, or question.
Yang et al. (2020) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: