Answers are grounded in this paper and cite their sources.
Electrochemical sensors have gained increasing attention for their high selectivity and sensitivity. Screen-printed electrodes (SPEs) are particularly attractive as low-cost, disposable, and scalable platforms that enable miniaturized electrochemical cells and field-deployable measurements. Here, we report a low-cost and easily fabricated carbon paste -SPE platform consisting of a 3D-printed acrylonitrile butadiene styrene body filled with carbon paste (graphite/mineral oil, 70:30) and a silver-ink pseudo-reference electrode. The device was evaluated using potassium ferricyanide (5.0 mmol L-1 in 0.5 mol L-1 KCl) as a redox probe. The ipa/ipc ratio was close to unity, while the peak-to-peak separation (ΔEp≈949 mV) indicated kinetic/ohmic contributions typical of composite carbon-based printed electrodes. A linear relationship between the corrected anodic peak current (iap) and the square root of the scan rate (v1/2) yielded an electroactive area of 0.485 cm², substantially larger than the geometric area, consistent with surface heterogeneity/porosity. Statistical validation by ANOVA confirmed good repeatability and reproducibility (p > 0.05, 95 % confidence). Overall, the proposed CP-SPE provides a robust and reproducible low-cost platform with strong potential for voltammetric sensing applications.
No takes yet. Share an insight, caveat, or question.
Faria et al. (2026) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: