Answers are grounded in this paper and cite their sources.
4,4′-Methylenedianiline (4,4′-MDA) is a key intermediate for the production of polyurethanes. A series of SO 3 H-functionalized ionic liquids (SFILs) were synthesized, and their catalytic performance was evaluated in the condensation reaction of aniline with formaldehyde for the synthesis of 4,4′-MDA. The result showed that SFILs had excellent catalytic activity, and their catalytic activity was consistent with their acid strength. [HSO 3 -bmim]CF 3 SO 3 (SImTf) with the highest acid strength showed the best catalytic activity. Then, the influence of reaction conditions on the condensation reaction of aniline with formaldehyde to 4,4′-MDA was investigated using SImTf as the catalyst, and suitable reaction conditions were obtained as follows: molar ratio of aniline to formaldehyde = 5, mass ratio of SImTf to formaldehyde = 3.5, reaction temperature of 80 °C, and reaction time of 8 h. Under the above reaction conditions, the conversion of aniline was 36.3%, and the yield and selectivity of 4,4′-MDA were 79.4% and 87.9%, respectively. However, the catalytic activity of the recovered SImTf declined dramatically. The results of UV–vis and FT-IR spectroscopy analyses showed that there was a chemical interaction between SImTf and aniline. The deactivated SImTf could be regenerated by acidization with trifluoromethanesulfonic acid, and the acidized SImTf could be reused four times with a tolerable loss of its catalytic activity. Meanwhile, a plausible catalytic reaction mechanism for the synthesis of 4,4′-MDA was proposed.
No takes yet. Share an insight, caveat, or question.
Tian et al. (2015) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: