Answers are grounded in this paper and cite their sources.
A technique to reduce the permeability decrease in a chemical vapor deposition pore modification of α-alumina support by a SiH 4 /C 2 H 2 /NH 3 reaction system has been proposed. SiC−Si 3 N 4 nanoparticles were formed in the gas phase of a hot-wall reactor at a temperature of 1323 K and deposited in/on the pore of the support to form a modification layer. The structure of the particles was confirmed by Fourier transform infrared and high-resolution transmission electron microscopy techniques to be a composite of crystalline SiC dispersed in an amorphous phase containing Si 3 N 4 . The structure retarded the sintering between the deposited particles and resulted in a modification layer with a large porosity on the surface of the membrane. A single gas permeation measurement showed that a reduction of the average pore diameter from 0.30 to 0.21 μm accompanied only an approximate 20% decrease in permeability: 31% reduction of the permeability decrease is achieved compared with the value predicted by a dense film deposition on the wall of the pore.
No takes yet. Share an insight, caveat, or question.
Hong et al. (1999) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: