Answers are grounded in this paper and cite their sources.
Thin‐film transistor (TFT) is a key element in flexible display technology for energy‐efficient wearable electronics. A systematic analysis is performed to demonstrate the high‐quality high‐k Al2O3 gate insulator (GI) by low‐cost spray pyrolysis on a polyimide (PI) substrate for low‐power flexible displays. The spray‐pyrolyzed Al2O3 film deposited at 375 °C shows an amorphous phase, smooth surface roughness, and higher metal‐oxygen bonding states. Additionally, one‐cycle Ar/O2 plasma treatment on Al2O3 enhances the dielectric properties, exhibiting a lower leakage current density of 6.1 × 10−6 A cm−2 (@6.0 MV cm−1), higher breakdown electric field of 9.7 MV cm−1, and negligible frequency dependence in capacitance curves. The high‐performance and robust amorphous InGaZnO TFTs are fabricated using Al2O3 GI on a PI substrate, demonstrating a field‐effect mobility of 13.4 cm2 V−1 s−1, threshold voltage of −0.7 V, subthreshold swing of 0.305 V dec−1, ION/IOFF ratio of ≈109, gate leakage current of ≈0.1 pA, zero hysteresis voltage, and stable operation against electrical and mechanical stresses. Finally, a high‐speed ring oscillator operating at an oscillation frequency of 2.63 MHz, along with a gate driver exhibiting rising and falling times of 655 and 576 ns, are presented using spray‐pyrolyzed Al2O3/a‐IGZO TFTs on a PI substrate.
No takes yet. Share an insight, caveat, or question.
Ahn et al. (2025) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: