Answers are grounded in this paper and cite their sources.
The condensation of lignin with hexamethylene diisocyanate (HDI) or of a mixture of lignin‐poly(ethylene oxide) (PEO) with HDI was investigated. The lignin used in this study was a kraft lignin from Pinus maritima, and was obtained from black liquor by acidification, filtration and vacuum drying. Thermogravimetric analysis was carried out to compare the weight loss against temperature of polyurethanes based on kraft lignin and hexamethylene diisocyanate, or of mixed polyurethanes lignin‐PEO‐HDI, with that of kraft lignin alone. It was shown that lignin can react with isocyanates in rather mild conditions to give polyurethanes, confirming previous results performed with model molecules. Some mechanical properties (Young's modulus and rupture strength) and glass transition temperature were also measured on the various above materials. In all cases it was concluded that lignin participates to the polycondensation reaction. As to rigid foams, it was found that polyurethanes prepared with oxypropylated glycerol, ethylene glycol and kraft lignin, in the weight proportions of 100/30/15, and HDI had good dimensional stability, and thermal and mechanical properties comparable to those of equivalent industrial materials.
No takes yet. Share an insight, caveat, or question.
Cheradame et al. (1989) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: