Answers are grounded in this paper and cite their sources.
Residual stresses which are developed in injection molded parts affect dimensional accuracy and mechanical properties of the final products. To predict the residual stresses in injection molded parts, three stages of injection molding, i. e., filling, packing, and cooling, must be taken into consideration for the thermal and flow analyses. Flow field anaysis for filling and postfilling stages has been carried out by using the control volume based FEM/FDM hybrid method. The generalized Hele‐Shaw flow is assumed. Compressibility of the Polymer melt is considered during packing and cooling stages. Modified Cross model is employed to reflect the dependency of the viscosity upon shear rate and temperature. An equation of state proposed by Tait offers an efficient means to describe pvt‐relationship of the polymer. Variations in temperature and pressure fields are obtained over all stages by the numerical flow analysis and used as input data for the stress analysis of the part. Plane stress elements, such as shell elements, are used for finite element stress analysis of injection molded parts with appropriate boundary conditions both in the mold and after ejected from the mold. The numerical analysis yields useful information which is relevant to the mechanical properties of the final products, e. g., residual stress distribution, shape of deformation, displacement field, and strain distribution.
No takes yet. Share an insight, caveat, or question.
Jung et al. (1999) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: