Answers are grounded in this paper and cite their sources.
Glass-ceramic implants containing apatite and wollastonite were studied under load-bearing conditions in a segmental replacement model in the tibia of the rabbit. Alumina-ceramic implants were used as a control. A sixteen-millimeter segment of the middle of the shaft of the tibia was resected at a point distal to the junction of the tibia and the fibula. The defect was replaced by a fifteen-millimeter-long hollow, cylindrical implant that was fixed by intramedullary nailing using a Kirschner wire. Two groups of eight rabbits each (one group with a glass-ceramic implant and the other with an alumina implant) were killed twelve weeks after implantation. Two similar groups were killed twenty-five weeks after implantation. The segment of the tibia that contained the implant was excised and tension-tested. The load to failure of glass-ceramic implants containing apatite and wollastonite increased with time. The loads to failure of the glass-ceramic and alumina implants at twelve weeks after implantation were 19.8 +/- 7.06 and zero newtons, respectively. The loads to failure of glass-ceramic and alumina implants at twenty-five weeks after implantation were 126.4 +/- 32.54 and 19.6 +/- 13.92 newtons, respectively. No glass-ceramic implants broke. A calcium-phosphorus layer at the interface of the glass-ceramic and the bone was observed by scanning electron microscopy and electron-probe microanalysis. There was no interposition of soft tissue between the glass-ceramic and the bone, as observed by Giemsa surface staining.
No takes yet. Share an insight, caveat, or question.
Kitsugi et al. (1989) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: