Answers are grounded in this paper and cite their sources.
Introducing a magnetic tunneling junction (MTJ) into a flip-flop enables nonvolatile power gating (PG) but large store energy to MTJ is a critical concern. We propose an optimized two-step store (TSS) control to first perform a short store with an optimal time for all nonvolatile flip-flops (NVFFs) and then perform a long store only at the failed ones for reducing the store energy. As the key technologies to realize this, we present a verify-and-retryable NVFF (VR-NVFF) circuit enabling the TSS control and an analytical expression for the optimal short-store time (T_short_opt) minimizing the store energy. To examine the effectiveness of the optimized TSS control and the validity of analytically derivedT_short_opt, we implemented the TSS control on a coarse-grained reconfigurable array (CGRA)-based accelerator chip and fabricated it in a 40-nm CMOS/MTJ hybrid process technology. Results demonstrated that analyticalT_short_optshowed a good agreement with the measured value (within 8% difference) under process and temperature variations. The TSS control withT_short_optreduced the store energy to0.32×of that of the conventional long-store-only technique. The break-even time (BET), which is the minimum power-gating time to get the gain in energy savings, was shortened to 0.51–0.7×by the TSS control, achieving the BET of 50–923 μ sin the range of 0 °C–80 °C.
No takes yet. Share an insight, caveat, or question.
Usami et al. (2023) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: