Answers are grounded in this paper and cite their sources.
Capture of carbon dioxide from combustion processes presents a unique and challenging technical problem arising from low CO 2 partial pressures, high flow rates, and the presence of water vapor and reactive contaminants such as SO 2 . A series of solid sorbents were evaluated to determine suitability for postcombustion capture. A lithium orthosilicate (Li 4 SiO 4 )-based absorbent supplied by Toshiba Corporation was found to have the most promising properties. The absorbent reacts chemically with CO 2 at elevated temperatures (550 °C) to form lithium carbonate (Li 2 CO 3 ) and lithium metasilicate (Li 2 SiO 3 ). The presence of water vapor was shown to greatly enhance CO 2 absorption rates without affecting capacity. Breakthrough capacities of ∼5–6 mmol/g (22–26 wt %) were obtained using a “clean” synthetic flue gas containing 15% CO 2 and 10% H 2 O in N 2 at 550 °C. Experimental studies showed that the absorbent used in a fixed bed process will likely require a thermal swing process with absorption at 550 °C and regeneration at 650 °C. Even for the high capacity of the Li 4 SiO 4 -based absorbent, an alternative to conventional fixed bed technology will be required for practical postcombustion capture from coal-fired power plants. Processes that can shorten cycle times by rapidly heating and cooling vessels and/or sorbents will be needed, and possible alternatives are described.
No takes yet. Share an insight, caveat, or question.
Quinn et al. (2012) studied this question.
Synapse has enriched 10 related papers. Consider them for comparative context: