Peculiarities of detecting pulses of runaway electrons and X-rays generated by high-voltage nanosecond discharges in open atmosphere

Peculiarities of detecting pulses of high-energy runaway electrons and the accompanying X-rays generated by high-voltage nanosecond discharges at high overvoltages in dense gases are discussed. Methods for overcoming difficulties encountered in such measurements are demonstrated. Different techniques for detecting runaway electrons and X-rays generated by discharges in open atmosphere are described, and typical errors that may be done when interpreting measurement results are considered. Experiments with the use of a small-size generator of nanosecond pulses with the idle-running voltage of 250–270 kV and stored energy of ∼0.5 J have been carried out. It is shown that, in measuring runaway electron pulses by using an experimental configuration with a grid anode, a major portion of the recorded signal is attributed to electromagnetic disturbances. It is found that X-rays are mainly generated due to the deceleration of runaway electrons in the anode, rather than in gas. The number of runaway electrons with energies ∼300 keV does not exceed 10 9 per shot, and the X-ray dose is 60–200 μR/shot, depending on the anode material.